Resources / Photography

Get out of auto.
See what changes.

I was looking for an old camera simulator to help explain manual exposure to a friend, but the tools I’d learnt from had vanished from the internet.

So I decided to build my own. Change the aperture, shutter speed and ISO, see what happens, and get a feel for how they work together before trying it with your camera.

Try the simulator
Manual modeDaylight · 50 mm lens
This simulator needs JavaScript and canvas support. The photography explanations below are available without it.
Light meterBalanced exposure
0 stops

An illustrated learning scene. Focus stays on the cyclist at 6 metres. Blur, brightness and grain are simulated.

Your camera

f/8
f/1.4f/22

Lower f-number: more light and a softer background.

1/250 sec
1/4000 sec1 sec

Slower shutter: more light and more movement in the picture.

100
1006400

Higher ISO: a brighter result, with more visible noise in this model.

What to look for

Start with aperture. Open it up and watch the distant trees and foreground flowers soften.

Put it into practice

Take control of the shot.

Pick a challenge, then change the settings. There’s more than one way to get it right.

Understand the exposure triangle

Different controls.
Different creative choices.

01

Aperture

The aperture is the opening in the lens. A lower f-number lets in more light and gives a shallower depth of field. A higher f-number keeps more of the scene acceptably sharp, but lets in less light.

02

Shutter speed

This is how long the camera gathers light. A fast shutter helps freeze movement. A slow shutter can show that movement as a blur. In this scene the camera stays still, so the cyclist moves while the surroundings stay put.

03

ISO

ISO influences the brightness of the recorded image. It doesn’t let more light through the lens. Raising it can help you keep a faster shutter in low light, with a trade-off in image quality that varies between cameras.

What’s a stop?

One stop is a doubling or halving of exposure. Change from 1/250 to 1/125 second and the shutter lets in twice as much light. Change ISO from 100 to 200 and the image becomes one stop brighter at the same aperture and shutter speed. To keep a similar brightness, balance a change with another control.

Taking it further

What happens when
you add a filter?

Filters fit in front of your lens and change the light reaching the camera. Here are three you might use when you take these ideas out into the real world.

01 / Control the light

ND filters

A neutral density filter reduces the light entering the lens. That lets you use a slower shutter speed or a wider aperture in bright conditions, while keeping a similar image brightness.

For example, a 3-stop ND filter lets you keep the shutter open eight times as long at the same aperture and ISO. You could use that extra time to blur moving water or passing people.

02 / Manage reflections

Polarising filters

A polarising filter can reduce reflections from surfaces such as water and glass. Rotate it to see the effect change. It can also make blue skies look deeper, depending on your angle to the sun.

It reduces some light too, so check your exposure after fitting it. Its effect on reflections is something you can’t fully recreate by adjusting the exposure settings.

03 / Balance the scene

Graduated ND filters

A graduated neutral density filter is darker at one end and clear at the other. Landscape photographers often place the darker part over a bright sky to help balance it against a darker foreground.

The transition needs to suit the scene. A straight horizon is easier to work with than trees or buildings sticking up into the sky.

A note on the model

A place to learn.
Then try it for real.

The exposure calculation uses the selected f-number, shutter speed, ISO and scene light level. The preview is a simplified illustration, not a photograph or a prediction of a particular camera’s output.

A real camera’s dynamic range, lens, sensor, processing and focus distance all affect the result. This model holds the lens at 50 mm and focus at 6 metres, exaggerates some effects to make them easier to compare, and doesn’t simulate diffraction, camera shake, lens filters or changing focus.

Zero on the meter is a starting point, rather than a rule for every photograph. Sometimes you’ll deliberately choose a darker or brighter result.

Explore my photography